Swahusada is the official distributor of Honeywell in Indonesia. All items on this website are new, and have a direct factory warranty. If you need another type, you can chat with us directly. We serve pre-order and indent purchases for all Honeywell units.
Honeywell RM7800 Series
The 7800 series are microprocessor-based industrial burner controls for automatically fired gas, oil or combination fuel single burner applications. The 7800-series are enabled for remote monitoring via the Thermal IQ Honeywell Connected Plant solution. For all type of burners with unlimited capacity. Benefits:
Approvals:
CE approved according EN 298 for continuous operation (when used with correct flame amplifier and flame sensor). EU models only
SIL-3 Capable certified. All models, except EC/RM7823 flame switches
APAVE accepted. EU models only
CSA/UL approved. US models only
Protection class:
Europe: IP00 (cabinet mount only)
Americas: NEMA 1 (cabinet or wall mount)
Ambient temperature -40 to 60°C
Maximum humidity 85 %rh
Failure Response Times (FFRT)
European 7800-series burner controllers (EU): 1.0 or 2.0s (depends on flame amplifier model)
American 7800-series burner controllers (US): 0.8 or 3.0s (depends on flame amplifier model).
Flame detector Depends on plug-in amplifier
Modular design with plug-in modules.
Selectable pre-purge time by ST7800A1xxx/U module selection
Accepts all existing Honeywell optical flame detectors and flame rods
All information regarding the burner control (6 last lockout conditions, flame signal, hours of operation …) are available on the keyboard display module or through communication
FEATURES
• Safety Features:
— Interlock check.
— Dynamic Ampli-Check™.
— Closed loop logic test.
— Dynamic input check.
— Dynamic safety relay test.
— Dynamic self-check logic.
— High Fire Purge Switch test (EC/RM7850A).
— Expanded safe-start check.
— Internal hardware status monitoring.
— Low Fire Start Switch test (EC/RM7850A).
— Tamper-resistant timing and logic.
